New DAF CF 440 FAX 8x2 space sleeper cab, Steerling cheese wedge, Palfinger crane

• Euro 6, 460 BHP, 12 speed gearbox

• Sleeper space cab c/w night heater

• Chassis drawbar prepared

• Sun visor

• Air con & electric windows

• 2 beacons on the roof

• Palfinger PK48002, 5 ext, remote control,

• Cheese wedge body, ready for winch

• Deck lashing rings & twist locks

• 13.8m extension, lifts 1,840kgs

• Ready for working at height saftey equipment

 

  • New
  • In Build
  • New & Unregistered
  • Available in your livery
  • Various finance packages options
  • Service & R&M packages available
Download spec sheet Enquire Now
Make / Model

DAF CF 460 FAX 8x2 rigid

Wheelbase:

5700 mm

Engine size & output:

MX-11, 6 cylinder diesel engine, 10.8 litres output 435 hp, basic engine immobiliser system

Gearbox:

Manual 12 speed, manual overdrive gearbox type 12S21. Rear axle ratio 2.79, Mechanical differential lock

Chassis details:

DPF and SCR split unit, located at the right-hand side of the chassis. DPF behind the first front axle, SCR with discharge behind the second front axle. 390 steel fuel tank, spray suppression fitted on all axles. Chassis paint finished in Grey, AdBlue tank 50 litres at the left-hand side of the chassis & Front underrun protection (FUPs).

Wheels & Tyres:

Front axles: tyre size 385/65R22.5, wheel size 22.5 x 11.75. Rear drive axles: tyre size 315/80R22.5, wheel size 22.5 x 8.25. Second rear axle. 315/80R22.5

Brake System:

Ventilated disc brakes at front and rear. Dual circuit air system with electronic control (EBS), exhaust brake.

Axles & Suspension:

Two front axles, type 183N. Vertical offset 112 mm, normal parabolic leaf suspensions with shock absorbers and stabiliser. Max. load 2 x 9 tonnes. Air suspension driven rear axle and steered trailing axle, driven single reduction rear axle type SR1344 with 4 air bellows, max load 11.5 tonnes. Steering axle with 2 air bellows max load 7.5 tonnes. Lifting device for the steered trailing axle.

Cab exterior:

Two front axles, type 183N. Vertical offset 112 mm, normal parabolic leaf suspensions with shock absorbers and stabiliser. Max. load 2 x 9 tonnes. Air suspension driven rear axle and steered trailing axle, driven single reduction rear axle type SR1344 with 4 air bellows, max load 11.5 tonnes. Steering axle with 2 air bellows max load 7.5 tonnes. Lifting device for the steered trailing axle.

Cab interior:

Sleeper compartment with lower bunk raised 250 mm above the engine tunnel. Storage facilities under bunk. Curtains along windscreen & side windows. High backed seat air suspended driver seat, Automatic Temperature Control (ATC) and air conditioning, basic radio/USB player with a 2 speaker system. Cruise control, tinted glass & electric windows.

Body details:
  • 8M long Approx. (built to maximum legal length)
  • 32T spec
  • Fully welded interlaced steel construction
  • Cross members set to 400mm spacing
  • Low profile underframe for minimum deck height
  • Heavy duty angle side rave – 10mm thick
  • Recessed lashing rings set into the top of the side rave – 8 each side
  • Heavy duty lashing rings under side raves for chains – 8 each side
  • Rope hooks fitted to every cross member
  • Single bend beavertail with minimum loading angle approx. 12o - 14o
  • 28mm hardwood deck sealed with timber sealant to prevent water ingress
  • 1.2M high front headboard – heavy duty steel. With KEL BERG profile cut into it.
  • Chain bar fitted to the headboard
  • LED marker lights, spray suppression and side guards all fitted to meet current legislation
  • Body shot blasted and cleaned then painted in two pack paint to customers colour choice
  • Ramps and headboard to be finished in hot dip galvanise
  • One powder coated steel tool box fitted to the side of the body
  • Recessed tool trays fitted either side of the winch plate
  • Extensive use of high tensile low weight steels
  • 2.5M x 1.0M fold forward Megawedge hydraulic ramps fitted to the rear of the body. Ramps powered by an electro hydraulic power pack mounted in a weather proof box. Check valves fitted to rams to guard against hose failure.
  • Rear steady legs powered by hydraulic rams with auto lower
  • Winch plate fitted to allow winch to be retro fitted.
  • Pull-out step and grab handle fitted to the front nearside
  • Conspicuity tape fitted to the side and rear of the body
  • One pair of twist locks fitted to the front of the body.
  • Sockets set into the deck to provide facility for a handrail to be fitted at a later date.
  • WVTA Included
Crane details:
  • PK48002EH-D BOOM
  • Lifting moment 456.3kNm (46.5mt)
  • Classification according to EN12999 : 2011
  • Slewing range 400°
  • Two laterally and vertically hydraulically extendable stabiliser jacks of rigid design with pilot operated
  • Non return valves maximum stabiliser spread 7.8m (R3X). Tiltable footplate
  • 5 section hydraulic extension boom from 7.7m - 13.8m including geometry control
  • Paltronic 50 rated capacity indicator with overload protection and emergency cut-off
  • Hour counter
  • Box level on each side of crane
  • 4 function radio remote control PALFINGER/DANFOSS with linear control levers.
  • 4 element control valve, LED display on handset
  • Emergency control on crane column
  • Oil cooler 10.5kw
  • Load hold valves on slewing, inner/outer and extension boom cylinders with return oil utilisation
  • Stabiliser control valve with provision for use of hydraulically
  • extendable additional stabilisers
  • AUSW stabiliser beam not stowed
  • Warning lights on stabilisers
  • GAS01 RPM control from RRC handset
  • Work light on/off
  • including painting (RAL2002) and crane accessories comprising
  • 15.0 ton load hook, fixing attachments, chassis mounted 300 litre
  • hydraulic oil tank with return filter
  • Boom above Horizontal
  • High pressure filter
  • HPSC Stability Monitoring System (Full)

  • Roof mounted beacon bar (choice of bulb or LED)
  • F&R amber LED strobe lights
  • Reversing cameras
  • Brigade 4 way camera system c/w 1 terabyte HD & GPS location trace
  • Cycle side scan system with audible left turn warning announcement
  • Under body steel tool box
  • Chapter 8 graphics
  • Sheeting systems (side to side or flip front to back)
  • Weighing systems (In cab or chassis mounted display)
  • Air operated auto rear door
  • Plus many more…..

Chassis cab: Warranty Plus 2 Year Vehicle & 3 Year Driveline - takes care of all warrantable repairs on the vehicle for two years and on the driveline for a third year together with associated breakdown coverage.